Application time: taking only 5 seconds per square foot to apply.
 Contact time to disinfect: 7-minute.
 Does not damage equipment so rooms do not need to be emptied. Even highly technical equipment can be left out.
  Does not leave any toxic residue. There is no need to wipe or rinse surfaces. Can reach the entire room, leaving no surface untreated by human error and is even effective on hard-to-clean surfaces.
 Easy to integrate with cleaning procedures.
 Is validated to comply with Good Manufacturing Practice (GMP) standards.

Complete disinfection/decontamination solutions for airborne and surface contamination in all environments, including those that follow cGMP and cGLP specifications. SteraMist™ provides dedicated bio-decontamination solutions with a focus on use sites in Pharmaceutical, Biotechnology, Hospital, Pharmacy, Laboratory and Bio-safety industries. To meet specific customer and regulatory requirements, SteraMist™ is able to offer a range of disinfection/decontamination solutions suitable for regulatory controlled aseptic processing facilities from BSL-3 and BSL-4 laboratories through to large research establishments.

SteraMist™ is designed to provide confidence that facilities have been efficiently and effectively decontaminated with a Six-Log reduction. With the advanced technology and reliance on the power of the hydroxyl radical and not the high percentage of hydrogen peroxide, SteraMist™ returns a facility back to operations faster than any other competing technology, with no corrosive impact on sensitive and expensive equipment.

If you are interested in using or buying SteraMist™ please call Us English 416-505-4007 / Français 778-512-8656

SteraMist™ Custom Build-In

SteraMist™ Custom Build-In. Contact us today for a free estimate for service or product purchase.Or set up a technical presentation and demo of the IHP technology.

For a facility with unique requirements, SteraMist BIT may be permanently incorporated to any volume of space to achieve area decontamination. Fully automated with downloadable data. Product performance supported by GLP efficacy data.

The SteraMist™ Permanent iHP™ Disinfection System is an automated disinfection/decontamination system that utilizes the facilities existing HVAC system. This involves installing remote SteraMist™ BIT™ applicators within the designated space to achieve maximum results. The SteraMist™ BIT™ generator and the Programmable Logic Control (PLC) will be housed in a NEMA enclosure in a central remote location.

The entire system can be developed for multiple rooms and various specifications; and controlled remotely through a NEMA interface. Once the area has reached its specific criteria for decontamination, monitors will test the air at required intervals until the H2O2 concentration is below 1 ppm. The status of the cycle is monitored with indicators and can be integrated into a supervisory control and data acquisition (SCADA) monitoring board.

Integrated Custom Decontamination Includes:
Pass-Through Chamber
Clean Rooms (including core areas)
Fixed Room/Cabinet Systems
Isolators
Biosafety Cabinets (BSCs)
GloveBoxes
RABS Lines
Tissue Banks
Pharmaceutical Mnfg Production Lines
Complete Sterile Mnfg Environments